Panasonic DMC-LS2 - Manual (Page 12)

Preparation
12
VQT0V10
About the Batteries
∫ Usable batteries
• One of the following messages
appears when you insert batteries for
the first time, change the batteries
when they become exhausted etc.
[CURRENT BATTERY TYPE SETTING:
OXYRIDE]/[CURRENT BATTERY TYPE
SETTING: ALKALINE/Ni-MH]
If the batteries inserted are different
from the type displayed in the
message, set [BATTERY TYPE] in the
[SETUP] menu. (P20)
• The battery type that is set can be
distinguished by the color of the
battery indication (blue or white).
– The battery indication does not appear
when using the AC adaptor (DMW-AC6;
optional).
A: When oxyride batteries are selected
The battery indication turns blue.
B: When alkaline/Ni-MH batteries are
selected
The battery indication turns white.
¢An oxyride battery is a new type of
non-rechargeable battery developed by
Panasonic.
It has more power than a regular alkaline
battery and is suitable for high-drain
equipment such as digital cameras.
• We recommend using Panasonic
batteries.
• Battery performance may vary greatly
depending on the brand used and the
storage life and conditions of the batteries.
• Battery performance temporarily
deteriorates in low temperature conditions
[10 °C (50 °F) or less]. However, it
recovers when the temperature returns to
normal.
• Depending on the temperature and the
conditions of use, the camera may not
operate properly and the batteries may
become exhausted without warning
because the battery indication is not
displayed correctly. This is not a
malfunction.
• We recommend turning the camera off
frequently while recording to conserve
battery power for longer battery life. If you
will be using the camera for long periods
of time, using rechargeable Ni-MH
batteries is recommended.
• Exhausted batteries may recover some
performance if left for a period of time.
However, they cannot be used for a long
time. Be sure to replace them with new
batteries.
∫ Unusable batteries
• Operation is not guaranteed when using
the batteries listed above. The batteries
can leak and the following malfunctions
can occur:
– The remaining battery power is not
displayed accurately.
– The camera does not turn on.
– Data written to the built-in memory or
the card is damaged resulting in loss of
the photographs.
∫ Battery shapes that cannot be used
• Batteries with unusual shapes cause
leakage, heat generation or explosion if
inserted in the camera.
AA Oxyride batteries (supplied)
¢
AA Alkaline batteries (optional)
AA Rechargeable Ni-MH (nickel metal
hydride) batteries (optional)
3
Manganese
batteries Lithium batteries
Nickel batteries Ni-Cd batteries
VQT0V10ENG.book 12 ページ ２００５年１２月２７日 火曜日 午後８時３４分