Panasonic DMC-LS2 - Manual (Page 74)

Menu Settings
74
VQT0V10
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P65)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
• If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use batteries with sufficient power (P13)
or the AC adaptor (DMW-AC6; optional)
when formatting.
• Do not turn the camera off during
formatting.
• It may take longer to format the built-in
memory than the card. (Max. about
15 sec.)
• You cannot format an SD Memory Card
when the card’s write protect switch is set
to [LOCK].
• If the built-in memory or the card cannot
be formatted, consult your nearest
servicenter.
[FORMAT]
Initializing the built-in memory or a
card
MENU
SET
FORMAT
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
NO
SELECT SET MENU
MENU
SET
YES
For USA assistance, please call: 1-800-272-7033
or send e-mail to : [email protected]
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
VQT0V10ENG.book 74 ページ ２００５年１２月２７日 火曜日 午後８時３４分