Panasonic DMC-LS2 - Manual (Page 58)

Advanced
58
VQT0V10
Playing Back Motion
Pictures
Press 2 1 to select a picture
with a motion picture icon [ ]/
[ ] and then press 4 to play
back.
• The motion picture recording time A is
displayed on the screen. After playback
starts, the motion picture recording time
disappears and the elapsed playback time
is displayed on the bottom right of the
screen.
For example, 1 hour 20 minutes and
30 seconds is displayed as [1h20m30s].
• The cursor displayed during
playback is the same as 3/4/
2/1.
• Press 4 again to stop motion picture
playback and return to the normal
playback screen.
Fast forwarding/Fast rewinding
Press and hold
2 1 during motion picture
playback.
2: Fast rewind
1: Fast forward
• The camera returns to normal motion
picture playback when 2 1 is released.
To pause
Press
3 during motion picture playback.
• Press 3 again to cancel pause.
• The motion pictures cannot be
recorded with audio.
• The file format that can be played back
with this camera is QuickTime Motion
JPEG.
• Please note that the bundled software
includes QuickTime to play back motion
picture files created with the camera on
the PC.
• Some QuickTime Motion JPEG files
recorded by a PC or other equipment may
not play back on the camera.
• If you play back motion pictures that have
been recorded with other equipment, the
picture quality may deteriorate or the
pictures may not play back.
• You cannot play back the audio of motion
pictures with audio recorded on other
equipment.
• When using a high capacity card, it is
possible that fast rewinding may be slower
than usual.
• You cannot use the following functions
with motion pictures.
– Playback zoom
(While playing back or pausing motion
pictures)
– [ROTATE DISP.]/[ROTATE]
– [RESIZE]/[TRIMMING]
PLAY MOTION
10:00 DEC. 1.2006
PICTURE
1 / 3
25s
100
_
0001
VQT0V10ENG.book 58 ページ ２００５年１２月２７日 火曜日 午後８時３４分