Panasonic DMC-LS2 - Manual (Page 20)

Preparation
20
VQT0V10
∫ About the menu screen items
• There are 3 menu screens (1/3, 2/3 and
3/3).
• You can switch menu screens from any
menu item by rotating the zoom lever.
[BATTERY TYPE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Select the type of battery being used from
the following 2 types.
[
ALKALINE (LR6)/Ni-MH]:
Alkaline batteries or Ni-MH batteries
[ OXYRIDE (ZR6)]:
Oxyride batteries
• If the type of battery being used and the
type of battery selected are not the same,
the battery indication will not be displayed
correctly.
• The [BATTERY TYPE] setting also affects
simple mode [ ].
[CLOCK SET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Change date and time. (P18)
[MONITOR]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Adjust the brightness of the LCD monitor in
7 steps.
• The [MONITOR] setting also affects
simple mode [ ].
[AUTO REVIEW]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. It is
then enlarged 4 times and
appears for about 1 second. This
mode is useful for confirming
focus. Pictures recorded using
auto bracket or burst mode are
not enlarged even if [ZOOM] is
selected.
[OFF]: The recorded picture does not
automatically appear.
• The auto review function is not activated
in motion picture mode [ ].
• When pictures are recorded in simple
mode [ ], auto bracket (P43) or burst
mode (P45), the auto review function is
activated regardless of the setting on the
auto review function. (The picture is not
enlarged.)
• The auto review setting is disabled when
using auto bracket or burst mode and in
motion picture mode [
].
[POWER SAVE]
(Except for mode)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
Power save mode is activated (the
camera is automatically turned off to
save the battery life) if the camera
has not been used for the time
selected on the setting.
[OFF]: Power save mode is not activated.
SETUP 1 / 3
BATTERY TYPE
EXIT MENU SELECT
MONITOR
AUTO REVIEW
0 n
OFF
1SEC.
CLOCK SET
POWER SAVE
SETUP 2 / 3
EXIT MENU SELECT
NTSC
PC
NO.RESET
RESET
BEEP
VIDEO OUT
USB MODE
SETUP 3 / 3
EXIT MENU SELECT
LANGUAGE
AUTO
ENG
SCENE MENU
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
VQT0V10ENG.book 20 ページ ２００５年１２月２７日 火曜日 午後８時３４分