Pentax IC-360 - Manual (Page 10)

Connector Name Description Remarks
BNC connector Output internal video signal through a coaxial cable.
Power connector
To supply power from the provided power supply unit
(12VDC, 1.5A)
RS-232 Connector
To connect external devices such as a device for audio
transmission.
Digital Input Terminal To connect external sensors.
RJ-45 Ethernet port To connect 10 Base-T Ethernet cable.
C. Descriptions of Ports (RS-232 and Digital Input)
Digital Input: To connect external devices such as infrared sensors. There are 2 pairs of
isolated input ports. See Appendix 7 for details.
S1+ S1- S2+ S2-
Pin Name Description
S1+, S1-
&
S2+, S2-
To connect external devices such as infrared sensors.
Solid State Relay (Optically isolated)
- Current
. Typical: 16mA
. Maximum: 20mA (Maximum Rating: 60mA)
- Pulse time
. Minimum: 200msec
- Internal resistor: 330 ohm
RS-232: To connect VersaCam IC Series to an Audio Device.
RX TX GND
VersaCam IC-360 User’s Guide 4