Pentax IC-360 - Manual (Page 38)

New Preset: Users can select up to 64 preset points whereby one click will send the camera to the
predefined position.
First, move the camera to the desired preset location. Then, click
“New Preset” button. The preset configuration pop-up window will be
activated.
In this window, select the number that you wish to assign to
this preset position, or change the existing preset, and type
the nickname you prefer for this point. Last, click the
“Add/Change” button and close this window using the
“Close” button at the bottom of the window.
New Group: This function is designed for sequential group monitoring of several designated preset
points. The VersaCam will automatically patrol the preset points within a group.
Users can easily make a monitoring group by gathering the above
preset points. First, click the “New Group” button and the new
Group configuration pop-up window will be activated. In this
window, select the number that you wish to assign to this new group,
or change the existing group. Type the nickname for the group at
“Name.” “Time,” the third item, determines how long, in seconds,
that the camera will rest at each preset point within a group. Select
each preset as a monitoring group member up to 9. Last, click the
“Add/Change” button and close the window using the “Close”
button.”
VersaCam IC-360 User’s Guide 32