Pentax IC-360 - Manual (Page 27)

B. Configuring Administrator’s Data at the Homepage
1) System Configuration
You can set the date & time, name,
location, and description on your
VersaCam. The model and serial
number appear automatically.
Date & Time: There are three date
& time menus. In the ‘VersaCam
Current Date & Time’ panel, the
current date and time of the
VersaCam’s clock is displayed. In
‘System (PC) Current Date & Time’
panel, the date and time of the clock
in the administrator ’s PC is
displayed. The administrator may
reset the camera’s clock with the
PC’s date and time by clicking the
‘Time Synchronization’ button. In
‘Manual Date & Time’ panel, the
administrator may set the date and
time to any desired value. The
administrator then sets the camera
date and time by clicking the ‘Time
Synchronization’ button.
Administrator’s E-mail Address:
In this panel, an administrator may
set up an E-mail address. If an
administrator puts a contact E-mail
address link on the VersaCam
homepage, the linked E-mail
address is synchronized with it.
This is so the administrator can easily maintain E-mail addresses without modifying the
HTML page.
Initialize Flash Information: The administrator can initialize almost all the information
saved in flash memory by using ‘Factory Setting’. However, ‘Date & Time’, ’Model’,
and ‘Serial Number ’ in the ‘System’ menu, ‘IP configuration’ in the ‘Network’ menu,
and all items in the ‘Video’ menu cannot be initialized. Also, Preset Position, which is
configured in the Factory Setting, cannot be initialized.
Rebooting: If the VersaCam IC Series has any problem, the
administrator can reboot it without manually disconnecting the power
supply. This button works as a reset switch.
VersaCam IC-360 User’s Guide 21