Pentax IC-360 - Manual (Page 65)

Appendix 6
Appendix 6 - VersaCam IC-360 Power Supply Installation Guide
1. 100-250VAC - 12VDC Supply For The VersaCam IC-360 (PW160)
1) Checking the Package Contents
Check that the following items are included in the VersaCam package:
Power Supply (1), AC Power Cord (1), Attachment Hook (1) (not used), Camera Adapter Cable
2) Installation
Place the power supply in a safe
location (not likely to fall) near the
IC-360 so that the cables easily reach
the camera. Connect the adapter
cable to the power cable, then to the
camera into the appropriate connector.
Make sure the camera is properly
mounted before connecting the power
supply cord to AC power because the
dome may rotate automatically when
power is applied.
3) Power Supply Specification
Model PW-160
Input Voltage 100-250VAC±10%, 50/60Hz, 1.2A Max.
Power Out 12VDC ± 1%, 3.5A
Power Consumption 42 Watts max
Operating Environment
32-104º F (0 ~ 40º C),
5-95% RH (non-condensing)
Dimensions
1.46”H x 2.60”W x 4.20”D [37mm H x 66mm W x
107 mm D]
Weight 0.83 lb (285g) including power cord
4) Adapter Cable View
5) Connection Diagram
VersaCam IC-360 User’s Guide 59