Primera Technology CX1200 User Manual

Page 25

Advertising
background image

Create a Print File 21

11. Print a

Proof Print

. Click File - Print. Set the number of copies to 1.

Important Note!

Immediately before you print any job you must print 1 page of that job (Proof Print)

to properly track toner usage. See Section 6.4 for more information.

12. Print your job. Click File - Print. Set the number of copies to correspond with the number of

labels you wish to print. Click OK.

Note:

Depending on the status of your supplies you may see Low supplies warning. Please see Section 6

for a guide to Toner Monitoring and Supplies Management.

Saving

PTPrint

files. To save your PTPrint file go to the File Menu- Save. The file will save with

an CDL extension. By default imported graphic files will not be imbedded in your PTPrint file.

Instead they are linked. This means that PTPrint store a path to the graphic file instead of the actual

file. In order to maintain the integrity of the PTPrint file you can not move the location of the

imported graphic file. For this reason it is recommended that all graphic files imported into PTPrint

are stored in the same folder as the PTPrint file. Alternately, you may click choose Save Embedded

File... to embed the graphics within the CDL file.

Supported Formats

. The following formats are supported via the print layout wizard: BMP,

EPS

,

JPG, GIF, PCX, PNG, TIFF. Primera recommends EPS files for the best quality. If your image

is not in one of these formats, it can be easily converted to one of the supported formats using

graphics programs such as Adobe Photoshop

®

, Illustrator

®

or Corel Draw

®.

See Section 5.5 for more

information.

Printing Over the Network. If your computer is not immediately next to the CX1200 you can still

print to it with out fearing that you may not reach the printer in time to attach label stock to the

rewinder. Follow this procedure.

1. Unload the label stock from the feed tray.

2. Send the print job.

3. When you reach the printer, load the label stock like you normally would using the instructions

in Section 4.

4. The print will automatically begin when the printer senses the paper is present.

TOC

INDEX

Advertising