Primera Technology CX1200 - Manual (Page 7)

Unpack and Assemble 3
2. In order to remove the base unit, you will need to detach the boards on the right and left side of
the base using a Phillips screwdriver to remove the screws. Lift the base out of the crate using
the nylon lifting handles on either side. Place the base on the Primera CX1200 cart or a similar
cart or bench with adequate surface area and load specifications. Two people are required to lift
the base on to a cart or counter.
Now remove two screws and washers from each side to remove the nylon handles. Finally,
replace the screws only.
1
2
Figure 2-2.
1
3
2
Figure 2-3.
! !
65.5 Kg.
140 lbs.
TOC INDEX