Primera Technology CX1200 - Manual (Page 5)

Introduction 1
Thank you for purchasing the CX1200 Color Label Press. The CX1200 is a fast low cost solution for
your label printing needs. Here after in the manual the CX1200 Color Label Press will be referred to
as the "CX1200". The laser printer portion will be referred to as the "printer". The unwinder and
rewinder unit will be referred to as the "base". Toner and label stock will be referred to as "media".
This manual is one of many sources of information for this product. If you have problems or
questions please consult one of these resources
• Tech Support Phone: 763-475-6979
• Tech Support Email: www.primera.com/contactsupport
• Online Knowledgebase: www.primera.com/kb
Note: The monitor, computer, surge protector and table are NOT included with the CX1200
Important Note on Label Press Operating Environment! It is strongly recommended that the
CX1200 Color Label Press is operated in an air-conditioned, humidity controlled, smoke free, pet free
environment.
Section 1: Introduction
Rewinder
Label Guide
Rewinder
Dancer
Arm Cut/Stop Button
Cutter
Label Guide
Discs Unwinder Printer
Control Panel Base Unit Feeder Door Tension Knob
Figure 1-1.
Tensioning Unit
Unwinder
Dancer
Arm
TOC INDEX