Primera Technology CX1200 - Manual (Page 35)

Create a Print File 31
8. In this case, 252 was the correct number to choose. Now the contour line follows the outer
border of the image correctly.
9. To add a bleed to the
image adjust the border
value on the counter cut
tool bar. Click Apply
again. Note: Any time you
adjust a value on the tool-
bar you will need to click
Apply to make the change.
The threshold window will
appear again with your
last entered value remem-
bered. Click OK to carry
out the change.
Note: Bleed amount is
NOT the correct value to
adjust.
TOC INDEX