Patton electronic 2996 - Manual (Page 30)

Preparing the RAS for configuration 30
Model 2960/2996 RAS User Manual 3 • Configuring the RAS for operation
Figure 16. Login window
5. Type superuser as the default username and password, then press <RETURN>. The Top Level Man-
agement window displays (see figure 17 ).
Figure 17. VT-100 Top Level Management window
6. Select option g Ethernet.
7. Select a PrimaryIpAddress to set the Ethernet IP address.
8. Type the IP address at the > prompt, then press <RETURN>.
9. Use the left arrow key to return to the previous menu.
10. Select b PrimaryIpMask to set the Ethernet IP subnet mask.
11. Type the IP netmask at the > prompt, then press <RETURN>.
12. Use the left arrow key to return to the top level management page.
13. Select a Home.
14. Select 1 StoreConfig to save your IP address and netmask.
The RAS is now prepared for configuration using a Web browser.