Patton electronic 2996 - Manual (Page 7)

7
Model 2960/2996 RAS User Manual Compliance Information
work until the problem has been corrected or until you are certain that the Model 2900 Series is not malfunc-
tioning. In accordance with FCC rules and regulation CFR 47 68.218(b)(6), you must notify the telephone
company prior to disconnection. The following information may be required when applying to your local tele-
phone company for leased line facilities. The Universal Service Order Code (USOC) is RJ48. The Facility
Interface Codes (FIC) are 04DU9-BN, 04DU9-DN, 04DU9-1KN, and 04DU9-1SN. The Service Order
Code (SOC) is 6.0Y.
FCC Part 68 Compliance Statement
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
outside of this equipment is a label that contains, among other information, the product identifier
US:3N8DFNAN004. If requested, this number must be provided to the telephone company. Please note the
following:
1. You are required to request service from the telephone company before you connect the RAS to a network.
When you request T1 Service, you must provide the telephone company with the Facility Interface Code.
Provide the telephone company with both of the following codes: 04DU9-B (1.544 MB D4 framing for-
mat) and 04DU9-C (1.544 MB ESF format). The telephone company will select the code it has available.
The Service Order Code(s) (SOC): 6.0Y. The required Universal Service Order Code (USOC) jack:
RJ 48C. The make, model number, and FCC Registration number of the RAS.
2. Your telephone company may make changes to its facilities, equipment, operations, or procedures that
could affect the proper functioning of your equipment. The telephone company will notify you in advance
of such changes to give you and opportunity to maintain uninterrupted telephone service.
3. If your RAS causes harm to the telephone network, the telephone company may temporarily discontinue
your service. If possible, they will notify you in advance, but if advance notice is not practical, you will be
notified as soon as possible and will be informed of your right to file a complaint with the FCC.
4. If you experience trouble with the RAS, please contact Patton Electronics, Co. for service or repairs.
Repairs should be performed only by Patton Electronics Co.
5. You are required to notify the telephone company when you disconnect the RAS from the network.
CE Notice
The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromag-
netic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A
Certificate of Compliance is available by contacting Technical Support.
Service
Facility
Interface Code
Service
Code
Network
Connection
1.544 Mbps SF format without line power 04DU9-BN 6.0Y RJ-48C
1.544 Mbps SF and B8ZS without line power 04DU9-DN 6.0Y RJ-48C
1.544 Mbps ANSI ESF without line power 04DU9-1KN 6.0Y RJ-48C
1.544 Mbps ANSI ESF and B8ZS without line power 04DU9-1SN 6.0Y RJ-48C