Patton electronic 2996 - Manual (Page 57)

Maintenance 57
Model 2960/2996 RAS User Manual 5 • Troubleshooting and maintenance
4. To save the displayed data as a text file, select the Save option on your browser (see figure 39 ). For exam-
ple, under Netscape, select File > Save As . A dialog box will display enabling you to save the contents of
the export parameters to a text file. Select the location where you want the file stored, type a file name, and
click
Save .
Figure 39. Saving the access server flash memory configuration data as a text file
Removing the defective RAS
1. Remove the replacement RAS from its shipping container and place it near where the malfunctioning RAS
is located.
2. Unplug both male power cable connectors from their outlets.
3. Rotate the power cord retainer clips out of the way, then remove both power cables from the malfunction-
ing RAS.
4. Disconnect and label the following cables from the malfunctioning RAS:
– the T1/E1/PRI WAN cables
– the RS-232 CONFIG cable
– the 10/100 ETHERNET cable
5. Disconnect the ground wire from the grounding stud.
6. If the RAS is mounted in a rack, remove it from the rack.
7. Place the malfunctioning RAS in the container that the replacement RAS came in so you can return the
RAS for repair.