Planet Technology VIP-101T - Manual (Page 19)

PLANET VIP-101T CLI configuration
- 13 -
Default
This command has no default value.
f) –modify
Parameter modify can be used to modify entries in phone book database that has addressed
to index number. The name, IP address and e164 number should be modified together in one
modify command.
Syntax Description
–modify <index number> name X ip xxx.xxx.xxx.xxx” e164 X
Default
This command has no default value.
10.[pppoe]
VIP-101T equipped with PPPoE client, this makes VIP-101T is able to establish Internet
connection without assistance.
Example
a) -print
Parameter print can be used to display overall PPPoE information and configurations.
When PPPoE connection established, related information (IP, gateway ….etc.) can be
G
Hint
When dialing, please press ” # ” after dialing E.164 number to send out telephone
number to destination.
usr/config$ pppoe
PPPoE device information and configuration
Usage:
pppoe [-print]|[-open]|[-close]
pppoe [-dev on/off][-id username][-pwd password]
-print Display PPPoE device information.
-dev Enable(=1) or Disable(=0) device.
-open Open PPPoE connection.
-close Disconnect PPPoE connection.
-id Connection user name.
-pwd Connection password.
-reboot Reboot after remote host disconnection.