Planet Technology VIP-101T - Manual (Page 35)

PLANET VIP-101T CLI configuration
- 29 -
a) –print
Parameter –print is used to display voice codec information and configuration. Voice codec
supports in VIP-101T are: G.723.1, G.729a, G.729, G.711u, G.711A.
Syntax Description
Voice codec setting information and configuration
Usage:
voice [-send [G723 ms] [G711A ms] [G711U ms] [G729A ms] [G729 ms] ]
[-volume [voice level] [input level] [dtmf level]]
[-nscng G723 used] [-echo used] [-mindelay/maxdelay used]
voice -print
voice -priority [G723] [G711A] [G711U] [G729A] [G729]
-print Display voice codec information and configuration.
-send Specify sending packet size.
G.723 (30/60 ms)
G.711A (20/40/60 ms)
G.711U (20/40/60 ms)
G.729A (20/40/60 ms)
G.729 (20/40/60 ms)
-priority Priority preference of installed codecs.
G.723
G.711A
G.711U
G.729A
G.729
-volume Specify the following levels:
voice volume (0~40, default: 30),
input gain (0~63, default: 32),
dtmf volume (0~31, default: 27),
-nscng Silence suppression and CNG. (G.723.1 only, On=1, Off=0).
-echo Setting of echo canceller. (On=1, Off=0, per port basis).
-mindelay Setting of jitter buffer min delay. (0~150, default: 100).
-maxdelay Setting of jitter buffer max delay. (0~150, default: 150).
Example:
voice -send g723 60 g711a 60 g711u 60 g729a 60 g729 60
voice -volume voice 20 input 32 dtmf 27
voice -echo 1 1
usr/config$