Planet Technology VIP-101T - Manual (Page 34)

PLANET VIP-101T CLI configuration
- 28 -
14. [voice]
voice command is associated with the voice codec setting information. These parameters
are designed to meet most calling environment. It is strongly recommended not to modify
these parameters on your own. If you met difficulty to establish communication toward
destination call party, please consult ITSP engineering staff, experienced personnel or local
distributor support staff for proper configuration.
G
Note
1. Parameters in this H.323 configuration menu are not suggested to change without
assistance of ITSP or experienced personnel, improper configuration will case
communications fail or malfunction in machine.
2. In Peer-to-Peer mode, h323 –print will only display information on e164, alias,
mode, RTP port, and allocated port range fields.
3. In Peer-to-Peer mode, please dial “#” after press IP address (ex.10.1.1.1 please
dial 10*1*1*1#) or E.164 number in Phone book to connect to destination call
party.