Planet Technology XRT-411 - Manual (Page 10)

6
Chapter 2
Installation
This Chapter covers the physical installation of the Broadband Router.
Requirements
•
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45
connectors.
•
TCP/IP protocol must be installed on all PCs.
•
For Internet Access, an Internet Access account with an ISP, and either a DSL or
Cable modem.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the Broadband Router.
Ensure the Broadband Router and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the
Broadband Router. Both 10BaseT and 100BaseT connections can be used simul-
taneously.
If required, connect any port to a normal port on another Hub, using a standard
LAN cable. Any LAN port on the Broadband Router will automatically function as
an "Uplink" port when required.
2