Planet Technology XRT-411 - Manual (Page 33)

PC Configuration
29
Printer Setup for Windows
The Broadband Router provides printing support for 2 methods for printing from Win-
dows:
•
Print Port Driver. After installing the Print Port Driver, Windows users can print
directly to the Broadband Router. Print jobs are spooled (queued) on each PC.
The supplied Print Port Driver supports Windows 95/98, Windows ME, Windows
NT4.0, Windows 2000 and Windows XP.
•
LPD/LPR Printing. If using Windows NT 4.0 Server or Windows 2000/2003
Server, LPD/LPR printing can be used. No software needs to be installed on either
the Windows Server or each client PC. Print jobs will be spooled (queued) on the
Windows Server, and can be managed using the standard Windows Server tools.
NOTE: GDI printers are not supported. Please refer to the CD for a list of GDI printers.
You can also check with the printer manufacturer.
Print Port Driver Setup
The following procedure is for all versions of Windows (95/98/ME, NT4.0, 2000, XP).
The Windows "Add Printer" screens will vary depending on your version or Windows,
but the procedure is the same:
1. Insert the supplied CD-ROM into your drive. A webpage is automatically shown.
Click the Print Port Driver to start the driver installation. If the web page does not
start automatically, run SETUP.EXE in the Driver folder.
2. Follow the instruction on the screen to complete the print port driver installation.
3. The Print Port setup should start automatically. You can also click
“Start”-
>
”Program” -> Broadband Internet Router” -> “Add Port” to start the print port
setup.
4. The Print Port Setup will then run, and a screen like the following will be displayed.
Figure 21: Print Port Setup