Planet Technology XRT-411 - Manual (Page 8)

Broadband Router User Guide
4
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
PWR On - Power on.
Off - No power.
STATUS
(Red) On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
LAN For each port, there are 2 LEDs
•
LNK/ACT
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub)
port.
•
Flashing - Data is being transmitted or received via the
corresponding LAN (hub) port.
•
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN On - Connection to the broadband modem attached to the WAN
(Internet) port is established.
Off - No connection to the broadband modem on the WAN (Inter-
net) port.
Flashing - Data is being transmitted or received via the WAN port.
USB On - Connection to printer established.
Off - No connection to printer; printer is Off or Off-line.
Flashing - Data is being transmitted to the printer.