ParkerVision WR1500 - Manual (Page 105)

WR1500
4-Port Wireless DSL/Cable Router
®
107
The following table describes the labels in this screen.
SNMP
LABEL DESCRIPTION DESCRIPTION
SNMP Confi guration SNMP Confi guration SNMP Confi guration SNMP Confi guration
Get Community
Get Community Enter the Get Community, Get Community, which is the password for the requests from the management station. which is the password for the requests from the management station. which is the password for the requests from the management station. which is the password for the requests from the management station. which is the password for the requests from the management station.
incoming Get and GetNext.
Set Community Set Community Enter the Set community, Set community, which is the password for incoming Set requests from the which is the password for incoming Set requests from the
management station.
Trusted Host If you enter a trusted host, your WR1500 Wireless Router will only respond to SNMP messages If you enter a trusted host, your WR1500 Wireless Router will only respond to SNMP messages
from this address. A blank (default) fi eld means your WR1500 Wireless Router will respond to all
SNMP messages it receives, regardless of source.
Trap
Apply Reset
REMOTE MANAGEMENT
Service Port 161
Service Access LAN
Secured Client IP Address All Selected 0.0.0.0
Get Community
Set Community
Trusted Host
Trap
Community
Destination
public
public
public
0.0.0.0
0.0.0.0
TELNET
SNMP Configuration
SNMP
FTP WWW SNMP DNS Security