ParkerVision WR1500 - Manual (Page 151)

WR1500
4-Port Wireless DSL/Cable Router
®
153
Incoming
Protocol Filters
Enter the fi lter set(s) you wish to apply to the incoming traffi c between Enter the fi lter set(s) you wish to apply to the incoming traffi c between
this node and the WR1500 Wireless Router.
Outgoing Outgoing
Protocol Filters
Enter the fi lter set(s) you wish to apply to the outgoing traffi c between Enter the fi lter set(s) you wish to apply to the outgoing traffi c between
this node and the WR1500 Wireless Router.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
your confi guration, or press [ESC] at any time to cancel.
19.4 Wireless LAN Setup
Use menu 3.5 to set up your WR1500 Wireless Router as the Wireless Router. To edit menu
3.5, enter 3 from the main menu to display Menu 3 - LAN Setup. When menu 3 appears, press
5 and then press [ENTER] to display Menu 3.5 - Wireless LAN Setup as shown next.