ParkerVision WR1500 - Manual (Page 64)

WR1500
4-Port Wireless DSL/Cable Router
®
66
Remote IP Address (or Gateway Remote IP Address (or Gateway
IP Address)
Type the IP address of the remote network or gateway. The gateway is an Type the IP address of the remote network or gateway. The gateway is an
immediate neighbor of your WR1500 Wireless Router that will forward the packet
to the destination. On the LAN, the gateway must be a router on the same
segment as your WR1500 Wireless Router; over the WAN, the gateway must be
the IP address of one of the remote nodes.
Remote IP Subnet Mask (PPPoE Remote IP Subnet Mask (PPPoE
and PPTP encapsulation)
When using a LAN to LAN application, type the IP subnet mask of the When using a LAN to LAN application, type the IP subnet mask of the
destination network. If you need to specify a route to a single host, use a
subnet mask of 255.255.255.255, in the subnet mask fi eld, to force the
network number to be identical to the host ID.
Network Address Translation Network Address Translation (NAT) allows the translation of an Internet protocol Network Address Translation (NAT) allows the translation of an Internet protocol
address used within one network to a different IP address known within another
network.
SUA (Single User Account) is a subset of NAT that supports two types of
mapping: Many-to-One and Server. When you select this option the WR1500
Wireless Router will use Address Mapping Set 255 in the SMT.