ParkerVision WR1500 - Manual (Page 52)

WR1500
4-Port Wireless DSL/Cable Router
®
54
password.
Select RADIUS Only to have the WR1500 Wireless Router just check the user database on the
specifi ed RADIUS server for a wireless station’s username and password.
Select Local fi rst, then RADIUS to have the WR1500 Wireless Router fi rst check the user
database on the WR1500 Wireless Router for a wireless station’s username and password. If
the user name is not found, the WR1500 Wireless Router then checks the user database on
the specifi ed RADIUS server.
Select RADIUS fi rst, then Local to have the WR1500 Wireless Router fi rst check the user
database on the specifi ed RADIUS server for a wireless station’s username and password. If
the WR1500 Wireless Router cannot reach the RADIUS server, the WR1500 Wireless Router
then checks the local user database on the WR1500 Wireless Router. When the user name
is not found or password does not match in the RADIUS server, the WR1500 Wireless Router
will not check the local user database and the authentication fails.
Dynamic WEP
Key Exchange
This fi eld is activated only when you select This fi eld is activated only when you select Authentication Required in the Wireless Port
Control fi eld. Also set the Authentication Databases fi eld to RADIUS Only. Local user
database may not be used.
Select Disable to allow wireless stations to communicate with the Wireless Routers without
using dynamic WEP key exchange.
Select 64-bit WEP or 128-bit WEP to enable data encryption.