Recording 06, Vcr plus+ programming with the power off, Extending a timer recording in progress – Pioneer DVR-520H User Manual

Page 51

Advertising
background image

Recording

06

51

En

VCR Plus+ programming with the power off

You can enter a PlusCode number when the recorder is
in standby. Note that the recording is always made to the
HDD. If you want to record to a DVD disc, you’ll need to
switch on the power and use the full VCR Plus+ program
screen.

Important

• You can’t use this feature until you have set up the

guide channels. See VCR Plus+ CH Setting on
page 96.

• You can’t change the recording mode.

• You can’t program daily or weekly timer recordings.

1

Press ‘VCR Plus+’.

The front panel display shows the current recording
mode and prompts you to enter the PlusCode number.

2

Use the number buttons to enter the PlusCode

number.

• To clear the last digit entered, press

CLEAR.

3

Press ENTER.

The display shows the timer settings:
Date

Start time

End time

HDD and Recording

channel.

• If

CODE ERROR appears in the display, check that

the PlusCode number is correct and that the guide
channel is set (see VCR Plus+ CH Setting on
page 96), then set the timer recording again.

• If

CAN’T SET appears in the display, it means that

although you entered a valid PlusCode number, the
program has already finished.

Extending a timer recording in progress

You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.

Moving the end time by 30-minute blocks

1

During timer recording, press and hold

ì REC for

three seconds.
The timer indicator disappears from the front panel
display.

2

Press

ì REC repeatedly to extend recording in 30

minute increments.

Programming a new end time

1

During timer recording, press TIMER REC to

display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press

HOME MENU, select Timer

Recording, then Timer Recording (View)).

ENTER

CLEAR

VCR Plus+

P L US CODE

2 9 32 4

HOME
MENU

ENTER

CLEAR

REC

PREV

NEXT

STOP REC

TIMER REC

ì

HDD Remain

---h--m(FINE)

DVD Remain

0h43m(FINE)

New Input

Date Start Stop CH

Mode Rec to Confirm

1/1

Timer Recording

12/13 MON
12/14 TUE

7:00 PM
9:00 PM

8:00 PM

10:00 PM

32
43

FINE
FINE

HDD
HDD

OK
OK

Advertising