Pioneer DVR-520H - Manual (Page 98)

The Initial Setup menu 13
98
En
Input Level (L1 / L2 / L3)
• Default setting: 0dB
You can adjust the gain of the audio from each external
input individually, from
–6dB to +6dB in steps of 3 dB to
optimize the recorded audio level.
Audio Out settings
Digital Out
• Default setting: On
If at any time you need to switch off the digital audio
output, set this to
Off, otherwise leave it On.
Note
• When set to Off, all the other Audio Out settings are
grayed out and can’t be set.
Dolby Digital Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting: Dolby Digital
If your AV amp/receiver (or other connected component)
is Dolby Digital compatible, set to
Dolby Digital,
otherwise set to Dolby Digital PCM. Check the
manual that came with the connected component if
you’re unsure whether it is Dolby Digital compatible.
DTS Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting: On
If your AV amp/receiver (or other connected component)
has a built-in DTS decoder, set to
On, otherwise set to
Off. Check the manual that came with the connected
component if you’re unsure whether it is DTS
compatible.
Important
• If you set to On with a non-DTS compatible amp/
receiver, noise will be output when you play a DTS
disc.
• When set to On, there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when DTS Out
is Off), noise is output from the analog outputs. Do
not play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo is selected using the AUDIO button. See
Switching audio channels on page 43.
96kHz PCM Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting: 96kHz 48kHz
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3) +6dB
+3dB
0dB
– 3dB
– 6dB
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out On
Off
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out Dolby Digital
Dolby Digital
PCM
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out On
Off
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out 96kHz 48kHz
96kHz
Initial Setup