Pioneer DVR-520H - Manual (Page 96)

The Initial Setup menu 13
96
En
After automatic tuning, a summary channel mapping
screen is displayed.
Press ENTER to return to the main menu screen.
Note
• If you want to cancel before tuning has finished,
press ENTER.
• You can manually tune and skip blank channels
using the Manual CH Setting, below.
Manual CH Setting
• Default setting: n/a
The channel skip function lets you skip channels where
there is no station so that as you change channels using
the
CHANNEL +/– buttons or the number buttons, you
only change to channels that have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
1 From the manual channel setting screen:
• Use the CHANNEL +/– button to change channels.
• If you want to skip the displayed channel (because
there is no station assigned to that channel), change
the
Skip setting to On.
• If you want to manually tune the displayed channel,
change the AFT (Auto Fine Tuning) setting to Off,
then move down to Level to manually tune to a
station.
• To return to the Initial Setup menu, press ENTER.
VCR Plus+ CH Setting
• Default setting: n/a
Guide channels are used by the VCR Plus+ system so
that the channel number specified in the VCR Plus+
programming numbers can be guaranteed to
correspond to the correct station.
1 Select ‘VCR Plus+ CH Setting’, then ‘Next Screen’.
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
• Use the / (cursor up/down) buttons to change
the guide channel for setting.
• Use the / (cursor left/right) buttons to change
the channel number.
• Use the PREV / NEXT button to display the previous/
next 10 guide channels.
3 To return to the Initial Setup menu, press ENTER.
Video Out settings
Component Video Out
• Default setting: Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
Initial Setup
1/3
CH Skip
Channel Mapping Antenna
Skip Skip Skip
2
3
4
5
6
7
8
CH
9
10
11
12
13
14
15
16
CH
17
18
19
20
21
22
23
24 CH
25
26
27
28
29
30
31
32
Off Off Off
Off Off Off Off
Off Off Off Off
Off Off Off Off
Off Off Off Off
Off Off Off Off
Off Off Off Off
Off Off Off Off
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
VCR Plus+ CH Setting Next Screen
Initial Setup
2ch
Off
Off
0
Skip
AFT
Level
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
VCR Plus+ CH Setting Next Screen
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
VCR Plus+ CH Setting
VCR Plus+ CH Setting
VCR Plus+ CH Setting
Guide CH Guide CH
1/20
1
2
3
4
5 6
7
8
9
10
6
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Component Video Out Interlace
Progressive
Initial Setup