Paradise RA 5785 - Manual (Page 11)

Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 11
• Always terminate the RF input and output connector prior to applying prime AC
input power.
• Never look directly into the RF output waveguide
• Maintain a suitable distance from the source of the transmission such that the power
density is below recommended guidelines in ANSI/IEEE C95.1. The power density
specified in ANSI/IEEE C95.1-1992 is 10 mW/cm
2 . These requirements adhere to OSHA
Standard 1910.97.
• When a safe distance is not practical, RF shielding should be used to achieve the
recommended power density levels.