Paradyne 7510-A2-GB20-00 727 - Manual (Page 21)

Customizing the DSU
3-2 7510-A2-GB20-00 March 1997
"
Procedure
To enter Device Name screen information:
1. Position the cursor in the Device Name field. Enter a name unique in your
system to identify the unit.
The maximum length of Device Name is 20 characters.
2. Position the cursor in the System Name field. Enter a name unique in your
network to identify the system.
The maximum length of System Name is 127 characters.
3. Position the cursor in the System Location field. Enter the physical location of
the system.
The maximum length of System Location is 127 characters.
4. Position the cursor in the System Contact field. Enter the name and contact
information for the person responsible for the unit.
The maximum length of System Contact is 127 characters.
5. Save the Device Name screen information as shown in the next section.
Saving Configuration Options
When changes are made to the configuration options, the changes must be
saved to take effect. Use the Save key or Save Configuration screen.
"
Procedure
To save configuration options changes:
1. Press Ctrl-a to switch to the screen function key area below the dotted line.
2. Select Save and press Return.
NOTE:
When Exit is selected before Save, a Save Configuration screen appears
requiring a Yes or No response.
If you select . . . Then . . .
Yes The configuration is saved.
No The Main Menu appears and changes are not saved.