Pioneer VSX-1015-K - Manual (Page 34)

Listening to your system 05
34
En
Neo:6 Music settings
• Default setting: 3
When listening to 2-channel sources in Neo:6 Music
mode, you can adjust the center image to create a wider
stereo effect with vocals. Note that this is only available
when using a center speaker.
1 With Neo:6 MUSIC mode active, press EFFECT/CH
SEL repeatedly to select C. IMAGE.
2 Use the +/– buttons to adjust the setting.
Adjust the effect from 0 (all center channel sent to front
right and left speakers) to 10 (center channel sent to the
center speaker only).
Listening in stereo
When you select STEREO or DIRECT , you will hear the
source through just the front left and right speakers (and
possibly your subwoofer depending on your speaker
settings). Dolby Digital and DTS multichannel sources
are downmixed to stereo.
• While listening to a source, press STEREO for
stereo playback.
Press repeatedly to switch between:
• STEREO – The audio is heard with your surround
settings (such as channel level) and you can still use
digital processing (such as the Midnight, Loudness,
and Tone control functions).
• DIRECT – Bypass all effects and surround settings so
that the audio remains as close to the source audio
signal as possible.
Note
• If you switch on any signal processing features (for
example, the Midnight listening mode or the tone
controls) when
DIRECT is selected, the receiver
automatically switches to STEREO .
Listening with Acoustic Calibration
EQ
• Default setting: OFF / ALL CH ADJ (after the Auto
MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic Calibration
Equalization set in
Automatically setting up for surround
sound (MCACC) on page 11 or Acoustic Calibration EQ on
page 43. Refer to these pages for more on Acoustic
Calibration Equalization.
• While listening to a source, press ACOUSTIC EQ.
Press repeatedly to select between:
• ALL CH ADJ – No special weighting is given to any
one channel.
• FRONT ALIGN – All speakers are heard in
accordance with the front speaker settings.
• CUSTOM 1/2 – Custom settings
• OFF – Switches Acoustic Calibration EQ off.
The MCACC indicator on the front panel lights when
Acoustic Calibration EQ is active.
Note
• You can’t use Acoustic Calibration EQ with WMA9
Pro sources or when MULTI CH IN is switched on,
and it has no effect when headphones are
connected.
• If you switch on Acoustic Calibration EQ when
DIRECT is selected, the receiver automatically
switches to STEREO .
RECEIVER CONTROL
SHIFT
THX
SLEEP DIALOG E
AUTO SURR
STANDARD ADV.SURR STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH CH
DVD
RECEIVER
RECEIVER CONTROL
SHIFT
THX
SLEEP DIALOG E
AUTO SURR
STANDARD ADV.SURR STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH CH
DVD
RECEIVER
RECEIVER CONTROL
SHIFT
THX
SLEEP DIALOG E
AUTO SURR
STANDARD ADV.SURR STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH CH
DVD
RECEIVER
PHONES
TUNER
CONTROL
TUNER
EDIT
SYSTEM SETUP RETURN PTY SEARCH EON MCACC SETUP MIC
DIGITAL IN S-VIDEO VIDEO
VIDEO2 INPUT
AUDIO L R
MULTI JOG MULTI JOG
TUNING/ STATION BAND MPX TONE ACOUSTIC EQ DIALOG ENHANCEMENT MULTI CH IN SIGNAL
SELECT EXTENDED MODE SPEAKERS MIDNIGHT/ LOUDNESS
MULTI JOG MULTI JOG
VSX_1015.book.fm 34 ページ ２００５年３月７日 月曜日 午後７時０分