Pioneer Elite DV-48AV - Manual (Page 23)

Getting started 04
23
En
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in
more detail.
Resume and Last Memory
With the exception of DVD-Audio and SACD
discs, when you stop playback of a DVD, CD, or
Video CD or DivX video/WMV discs,
RESUME
is shown in the display indicating that you can
resume playback again from that point.
If the disc tray is not opened, the next time you
start playback the display shows
RESUME and
playback resumes from the resume point. (If
you want to clear the resume point, press
 (stop) while RESUME is displayed.)
With DVDs and Video CDs, if you take the disc
out of the player after stopping playback, the
last play position is stored in memory. If the
next disc you load is the same one, the display
shows
LAST MEM and playback will resume.
For DVD-Video discs, the player stores the play
position of the last five discs. When one of
these discs is next loaded, you can resume
playback.
Note
• The Last Memory function doesn’t work
with VR format DVD-R/-RW, DVD-Audio or
SACD discs.
• If you don’t need the Last Memory function
when you stop a disc, you can press
 OPEN/CLOSE to stop playback and
open the disc tray.
Button What it does
 Starts playback.
If the display shows
RESUME or
LAST MEM playback starts from the
resume or last memory point (see
also Resume and Last Memory
below.)
 Pauses a disc that’s playing, or
restarts a paused disc.
 Stops playback.
See also Resume and Last Memory
below.

(remote
only) Press to start fast reverse scanning.
Press
 (play) to resume normal
playback.

(remote
only) Press to start fast forward scanning.
Press
 (play) to resume normal
playback.
 Skips to the start of the current
track, title or chapter, then to
previous tracks/titles/chapters.
 Skips to the next track, title or
chapter.
Numbers
(remote
only) Use to enter a title/chapter/track
number. Press
ENTER to select.
• If the disc is stopped, playback
starts from the selected title (for
DVD), group (for DVD-Audio) or
track (for CD/SACD/Video CD).
• If the disc is playing, playback
jumps to the start of the selected
title (VR mode DVD-RW), chapter
(DVD-Video) or track (DVD-Audio*/
SACD/CD/Video CD).
*within the current group
DV48AV_EN.book 23 ページ ２００７年６月６日 水曜日 午前１０時２分