Pioneer Elite DV-48AV - Manual (Page 38)

Initial Settings menu 08
38
En
Chapter 8
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
Note
• In the table below, the default setting is
shown in bold : other settings are shown in
italics.
• The Digital Audio Out settings only need
to be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the operating instructions supplied
with your other equipment to see which
digital audio formats it’s compatible with.
• Some settings, such as TV Screen , Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
• The HDMI Out , HDMI Resolution and
HDMI Color settings only need to be set if
you connected this player to an HDMI-
compatible component using the HDMI
connector.
• The Digital Audio Out , Component Out ,
SACD Playback and Speakers settings
cannot be set if the player is connected to
an HDMI-compatible component using
the HDMI connector. Additionally, certain
settings such as
HDMI Out , HDMI
Resolution , and HDMI Color may be
changed automatically.
Initial Settings
DV48AV_EN.book 38 ページ ２００７年６月６日 水曜日 午前１０時２分