Pioneer Elite DV-48AV - Manual (Page 48)

Initial Settings menu 08
48
En
HDMI output with DVD-Audio and SACD sources
The way audio sources are output from the HDMI terminal depends on the specification of the
connected component.
* 1 This unit checks the specification of the connected component (such sample rate/multi-
channel limitations and compatibility with protected audio contents) and outputs the signal
accordingly. Note that ‘DVD-Audio compatible’ indicates compatibility with protected audio
contents. ‘SACD compatible’ indicates compatibility with DSD signals.
* 2 If HDMI Out setting (page 39) is set to LPCM (2CH) , DVD-Audio multichannel sources will be
downmixed to stereo. (In cases where the source is downmix-prohibited, only the front left/right
channels are output.) For SACD sources, the 2 channel (stereo) SACD audio area is selected.
If the video output resolution is 480i or 480p audio output may be limited to 2 channel (depending
to the connected component).
* 3 In cases where the source is downmix-prohibited, only the front left/right channels are output.
* 4 If CPPM shows in the front panel display, it means it is not possible to output CPPM copycon-
trolled DVD-Audio sources from the HDMI connection. Discs with no CPPM protection are
limited to 2 channel output.
Component specification
Disc Format (DVD-Audio or SACD)
2 ch
DVD-Audio and
5.1 channel compatible on HDMI
*1
DVD-Audio and
2 channel compatible on HDMI
*1
Left/Right or
2 ch downmix *3
Incompatible with
DVD-Audio on HDMI
*1
2 ch
2 ch
VSX-84TXSI
VSX-82TXS
PDP-5080HD
PDP-4280HD
PDP-5050HD
PDP-4350HD
5.1 ch
No sound *4 No sound *4
5.1 ch *2
Component/output
Example
Component
SACD, DVD-Audio and
5.1 channel compatible on HDMI
*1
2 ch VSX-91TXH 5.1 ch *2
No sound
Auto (DSD)
SACD
No sound
No sound
DSD 2ch/5.1 ch
DV48AV_EN.book 48 ページ ２００７年６月６日 水曜日 午前１０時２分