Pioneer Elite DV-48AV - Manual (Page 58)

Additional information 09
58
En
USB troubleshooting
Note
• Static electricity or other external influences may cause malfunctioning of this unit. In this
case, unplug the power cord and then plug back in. This will usually reset the unit for proper
operation. If this does not correct the problem, please consult your nearest Pioneer service
center.
A connected DVI
component (with HDCP)
doesn’t work with this
player. • This unit has been designed to be compliant with HDMI (High-
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable signal
transfers.
Problem Remedy
Problem Remedy
USB mass storage device
is not recognized by the
system. • Make sure you have completely inserted the USB connector to this unit.
• Check that the memory format is FAT16 or FAT32.
• USB devices with an internal USB hub are not supported.
Files don’t show up in the
Navigator/Photo Browser. • The files must have the correct file extension: .mp3 for MP3 files; .wma for
WMA files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or lower-
case is OK).
• Make sure the file permission hasn’t been restricted (through a password,
etc.).
Can’t play WMA or MPEG-
4 AAC files. • The files were recorded using DRM (digital rights management) or
FairPlay copy-protection. This is not a malfunction.
DV48AV_EN.book 58 ページ ２００７年６月６日 水曜日 午前１０時２分