Pioneer Elite DV-48AV - Manual (Page 57)

Additional information 09
57
En
HDMI troubleshooting
Problem Remedy
No HDMI audio output. • Check whether or not HDMI Out is set to Off. (See HDMI Out on
page 39.)
• This unit has been designed to be compliant with HDMI (High-
Definition Multimedia Interface). Depending on the component you
have connected, unreliable signal transfers may result.
• If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.
No HDMI video output. • Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
• Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable signal
transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See HDMI Resolution on
page 40 to change the HDMI resolution. See Resetting the output
resolution to the default setting with HDMI connection on page 16 if you
want to reset the output resolution.
No multichannel HDMI
audio. • Make sure the HDMI Out setting is set to Auto, Auto (DSD) or
LPCM (5.1CH) (see HDMI Out on page 39 to do this). See also About
the HDMI audio output settings on page 47 and HDMI output with
DVD-Audio and SACD sources on page 48.
No sound is output from
the AUDIO OUT (5.1ch)
jack when connected via
HDMI. • Check whether or not HDMI Out is set to Off. (See HDMI Out on
page 39.)
Component Out cannot
be set to Interlace. • You can use the Interlace setting if the HDMI Resolution is set to
720 x 480i.
DV48AV_EN.book 57 ページ ２００７年６月６日 水曜日 午前１０時２分