Planet Technology 23x Indoor Speed Dome Camera CAM-ISD48 - Manual (Page 20)

5.4 Ceiling-drop mount (with CAM-CM)
Pre-assembling of the Bowl Module
Both ceiling-drop and wall-mount needs to have a bowl module, an assembly of the
mounting base and metal bowl supplied in the mounting kit, be built first.
Follow the flow chart on below for building up the bowl module.
Put the base
into the bowl Make a
module
The mounting base The bowl module Metal bowl
To drop camera from ceiling, take the ceiling bracket (option item) and bowl module,
1. put the cables into the tube and have them come out from cable outlet
2. put the bracket on top of the bowl and tight them together with screws
The bowl module
Put the bowl
on bracket
Make an
assembly
3. Locate the assembled piece onto the place the camera is
to be mounted, and fix it on the surface completely with
screws through the 3 holes on the bracket
4. Get the camera and plug it onto the base; watch for the
direction of the connectors on camera and mounting base
and be sure they are mated well. Then rotate the camera
body counter-clockwise until it is completely locked
5. Put the safety screw (anti-loss) in locking position and
screw it in
. .
User’s manual 20