Planet Technology 23x Indoor Speed Dome Camera CAM-ISD48 - Manual (Page 7)

4. Appearance
4.1 To Access DIP Switches
Before the camera is mounted in place, be sure the following four settings are
properly executed, or the camera may fail the control:
„
Camera ID setup
„
Protocol selection
„
Baud rate selection
„
Termination impedance
Tools:
Use pencil, pincer, paper clip or small flat screw driver, to move the lever of DIP
switch
Access points:
The DIP switches are located on the bottom of the dome cameras:
DIP switches
. .
User’s manual 7