Planet Technology 23x Indoor Speed Dome Camera CAM-ISD48 - Manual (Page 26)

6. Connecting Wires
The cables, wires and connector attached to the speed dome are categories into 4
major functions of:
1. Power
2. Video
3. RS-485
4. Alarm-in and out
They are easily distinguished from one to another, as being featured with different
connectors. Refer to the picture on below to learn about cable and connector
information.
6.1 Power
The camera will obtain power source from two kinds of power: DC12V or
AC24V.
1. Without outdoor housing, DC12V:
When operated with DC12V, the camera may consume 1000mA DC current in
full load condition. To power the speed dome is simple. Get the DC jack from
the camera, and connect the adapter plug to the jack.
Note: To secure the safety and maintain correct function, always use the
switching DC 12V / 1.5A power adapter. The switching type power adapter
is strongly recommend. Due to switching power adapter can output stable
power source, that can prevent the speed dome camera from damage.
DC 12V adapter
(supplied)
. .
User’s manual 26