Panasonic KX-FP145AL - Manual (Page 41)

7. Answering Device (KX-FP145 only)
39
Incoming Messages
7.3 Listening to recorded
messages
The display will show the total number of
recorded messages.
When the unit has recorded new voice
messages:
–
The {AUTO ANSWER} indicator will flash
when AUTO ANSWER is turned ON.
– The total number of recorded messages will
flash on the display.
– The unit will beep slowly if the message alert
feature is activated (feature #42, page 49).
Press {PLAY MESSAGES}.
L Only the new recorded messages will be
played.
L Adjust the speaker volume using {A} or {B}.
L After playing back all of the new messages,
the {AUTO ANSWER} indicator will stop
flashing but will remain lit up when AUTO
ANSWER is turned ON. If you press {PLAY
MESSAGES} at this time, all the recorded
messages will be played.
Note:
L The total recording time of all messages
(greeting, incoming and memo) is about 18
minutes. If messages are recorded in noisy
rooms, the time may be shortened.
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the
beginning of the message, the previous
message will be played.
L To play back a specific message, press {<}
or {>} and search for the message you want
to listen to.
To skip a message
Press {>} to play the next message.
To stop playback temporarily
Press {STOP}.
L If you press {PLAY MESSAGES} within 1
minute, the unit will resume playing the rest of
the messages.
Voice time/day stamp
During playback, a synthesised voice will
announce the day of the week and time that each
message was recorded.
To change the playback speed
Press {QUICK} to play messages at one and a
half times the original speed. Press {SLOW} to
play messages at half the original speed.
L To return to the original speed, press either
{
QUICK} or {SLOW} again during quick or
slow playback.
7.3.1 Erasing recorded
messages
To erase a specific message
Press {ERASE} while listening to the message
you want to erase.
To erase all the messages
1 Press {ERASE}.
2 Press {SET}.
L To cancel erasing, press {STOP}.
3 Press {SET} again.
Helpful hints:
L Messages recorded in the voice mailbox will
not be erased.
Example:
02
Flash/Light
{ STOP}
{ ERASE}
{ QUICK}
{ PLAY MESSAGES}
{ SET}
{<}{>}{A}{B}
{ SLOW}
FP141-145AL.book Page 39 Tuesday, October 21, 2003 11:07 AM