Panasonic KX-FP145AL - Manual (Page 54)

8. Programmable Features
52
8.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 47 to
page 51.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
8.4.1 Program code and direct
command button
{#}{ 0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 18 for details).
{#}{ 0}{2} Your logo
L Enter your logo using the dial keypad (see
page 19 for details).
{#}{ 0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 20 for details).
{#}{ 0}{4} Sending report
– { 1}: “ ON”
– { 2}: “ OFF”
– { 3}: “ ERROR” (default)
{#}{ 0}{6} FAX ring count
– { 2}: “ 2” (default)
– { 3}: “ 3”
– { 4}: “ 4”
– { 5}: “ 5”
– { 6}: “ 6”
– { 7}: “ 7”
– { 8}: “ 8”
– { 9}: “ 9”
{#}{ 0}{6} TAD ring count (KX-FP145 only)
– { 0}: “ RINGER OFF”
– { 1}: “ TOLL SAVER”
– { 2}: “ 2” (default)
– { 3}: “ 3”
– { 4}: “ 4”
– { 5}: “ 5”
– { 6}: “ 6”
– { 7}: “ 7”
– { 8}: “ 8”
– { 9}: “ 9”
{#}{ 1}{0} Recording time for an incoming
message (KX-FP145 only)
–
{ 0}: “ VOX” (default)
– { 1}: “ 1 MIN”
– { 2}: “ 2 MIN”
– { 3}: “ 3 MIN”
– { 4}: “ 4 MIN”
– { 5}: “ 5 MIN”
– { 6}: “ 6 MIN”
– { 7}: “ 7 MIN”
– { 8}: “ 8 MIN”
– { 9}: “ 9 MIN”
{#}{ 1}{1} Remote operation ID (KX-FP145
only)
–
{ 1}: “ ON” (default)
– { 2}: “ OFF”
L If you select “ ON”, enter a 3-digit number
except a number using 0 or 7.
{#}{ 1}{3} Dialling mode
– { 1}: “ PULSE”
– { 2}: “ TONE” (default)
{#}{ 1}{7} Ringer pattern
– { 1}: “ A” (default)
– { 2}: “ B”
– { 3}: “ C”
{#}{ 2}{2} Journal report
– { 1}: “ ON” (default)
– { 2}: “ OFF”
{#}{ 2}{3} Overseas mode
– { 1}: “ NEXT FAX”
– { 2}: “ OFF”
– { 3}: “ ERROR” (default)
{#}{ 2}{5} Delayed transmission
– { 1}: “ ON”
– { 2}: “ OFF” (default)
L If you select “ ON”, then enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 48 for details).
{#}{ 2}{6} Caller ID list
– { 1}: “ ON”
– { 2}: “ OFF” (default)
FP141-145AL.book Page 52 Tuesday, October 21, 2003 11:07 AM