Panasonic KX-FP145AL - Manual (Page 51)

8. Programmable Features
49
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL [ ±]
“ NORMAL” (default): For normal contrast.
“ DARKER”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON [ ±]
If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select “ ON”.
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is “@ #9”.
L Do not enter “0000”.
6. Press {SET}.
7. Press {MENU}.
Note:
L This code is also used to receive a voice
message and a fax in the same call (page
33)(KX-FP141 only).
Code #42 (KX-FP145 only): Setting the
message alert
MESSAGE ALERT
=OFF [ ±]
To alert you when a new voice message is
recorded. The unit beeps slowly until you listen
to the recorded messages.
“
ON”: You will be alerted to new messages by a
beeping sound.
“
OFF” (default): Deactivates this feature.
Code #43 (KX-FP145 only): Setting the
recording time alert
REC. TIME ALERT
=OFF [ ±]
To alert you with beeps when there is less than
60 seconds of remaining recording time. The
slow beeps will continue until you erase the
recorded messages (page 39, 43).
“
ON”: You will be alerted that you have reached
the recording time limit by a beeping sound.
“
OFF” (default): Deactivates this feature.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON [ ±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“
ON” (default): You will be alerted to a reception
problem by a beeping sound.
“
OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON [ ±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
“
ON” (default): You do not have to press
{ FAX/START} for fax reception.
“ OFF”: You have to press {FAX/START} for fax
reception.
Code #47 (KX-FP145 only): Setting the voice
guidance
VOICE GUIDANCE
=ON [ ±]
If you wish to hear voice guidance, activate this
feature.
“
ON” (default): You will hear the friendly reception
voice guide, pre-recorded messages and voice
time/day stamp.
“
OFF”: Deactivates this feature.
Code #51 (KX-FP145 only): Setting the
mailbox 1 password
BOX1 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 1.
Setting Recording
paper size Original
document
size
100% A4 Letter
92%
(default) A4 A4
86% A4 A4
72% A4 Legal
FP141-145AL.book Page 49 Tuesday, October 21, 2003 11:07 AM