Pelikan 9CH - Manual (Page 17)

17
2-2. Rear Panel
Figure 2.2.1. Rear Panel
Table 2.2.1. Rear panel connections
NO Connection Purpose
1 VIDEO IN 9/16 connectors for video input. (NTSC/PAL)
2 VIDEO OUT 9/16 connectors for video output. (Loop Back)
3 SPOT Composite video output for spot monitoring.
4 VIDEO Composite video output in NTSC or PAL format.
5 S-VHS S-VHS output.
6 VGA Connector for VGA monitor.
7 AUDIO IN 4 connectors for audio input.
8 AUDIO OUT 1 connector for audio output.
9 RS-232 For engineering use only.
10 LAN RJ-45 connector for LAN connection.
11 RS-485/422 For camera control use.
12 SENSOR IN 8/16 connectors for sensor device connection.
13 ALARM OUT 4 connectors for alarm device connection.
Provides simple On/Off switching by using relay. 0.5A/125V,
1A/30V
14 POWER Connect AC115/230V power cable.