Pelikan 9CH - Manual (Page 19)

19
3. Setting up the DVR
The following sections detail the initial setup of the DVR
3-1. Setup – Main Screen
When the SETUP button is pressed, the DVR will ask for a password. The default password is
1111, which can be entered by pressing the up button 4 times and then pressing the SEL button.
It is recommended that a new password be assigned to protect the system. The procedure for
assigning a password is found in section 3.7. After a password has been assigned, enter the
password by using the direction keys (representing 1, 2, 3, & 4) and press the SEL button for
the password validation. Once the password is entered the Setup screen as shown in Figure
3.1.1. will appear. Navigate through the menu items and press the SEL button to enter the sub-
category menu.
Figure 3.1.1. Setup screen
Table 3.1.1. Setup menu configuration