Pelikan 9CH - Manual (Page 25)

25
Figure 3.3.2. Schedule recording setup screen
3-4. Setup – Device Mode
To set values for device, use the UP and DOWN controls to navigate through the menu items.
Change the value of the menu item using the LEFT and RIGHT controls.
Figure 3.4.1. Device mode setup screen
Table 3.4.1. Menu items in Device Setup screen
Item Description
ALARM OUT Set the sensor, motion, and video loss for each alarm.
SPOT-OUT Set the all details for spot monitoring.
PTZ Set the PTZ camera speed, number, type and ID.
CHANNEL Select specified channel for motion zone setup.
MOTION ZONE Select Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.