Pelikan 9CH - Manual (Page 26)

26
KEY TONE Enable/disable key tone.
REMOTE CONTROL ID Select an ID of remote control.
1. Select ID.
2. Press the same number as ID set in DVR on a remote
control.
3. Then icon will be displayed on Live screen of DVR
that respond to the remote control.
SENSOR Select sensor from 1 to 9(16).
TYPE Set the type of sensor for the specified channel. Options are:
None, N/O (normal open), and N/C (normal closed).
3-4-1. ALARM-OUT
Figure 3.4.2. ALARM-OUT setup screen
Table 3.4.2. Menu item in ALARM-OUT Setup screen
Item Description
ALARM OUT Select alarm from 1 to 4.
SENSOR IN Enable setting up to 4 sensors of 9/16 sensors for the each alarm.
MOTION ON Enable setting up to 4 cameras of 9/16cameras for the each alarm.
VIDEO LOSS ON Enable setting up to 4 cameras of 9/16 cameras for the alarm.
ALARM DURATION Set the dwell time of alarm from1 to 60seconds.