Pelikan 9CH - Manual (Page 21)

21
3-2. Setup – Display Mode
To set values for live display, use the UP and DOWN controls to navigate through the menu
items. Change the value of the menu item using the LEFT and RIGHT controls.
Figure 3.2.1. Display mode setup screen
Table 3.2.1. Menu items in DISPLAY mode setup
Item Description
OSD Enable/disable on-screen-display.
SEQUENCE Enable/disable sequential display of video in Full Screen mode.
SEQ-DWELL TIME Set the dwell time for each, 4 or 9 channels display in sequential
display mode.
OSD CONTRAST Set the visibility level of the On Screen Display (OSD).
CHANNEL Select the channel for applying the following settings.
Presses SELECT to change channel name.
DISPLAY Enable/disable display of the video channel in live display mode
BRIGHTNESS Change the brightness value for the specified channel.
CONTRAST Change the contrast value for the specified channel.
HUE Change the hue value for the specified channel.
SATURATION Change the saturation value for the specified channel.