Panasonic NV-VP30EBL - Manual (Page 21)

Adjusting the playback picture
If the picture contains noise bars and it is not clear to see (tracking adjustment):
CH
To return to Auto Tracking:
CH
If the still picture jitters or jumps (V-lock adjustment):
CH
Under normal conditions, the VCR automatically adjusts the tracking for
optimum performance.
However, in some cases it may be necessary to adjust it manually.
If noise bars appear during normal playback, slow playback or still playback,
follow the operations below.
During normal or slow playback, press or until the bars noise
disappear.
• If the noise bars appear during still playback, switch the VCR over to the
slow playback mode and then adjust the tracking as explained above.
Press or simultaneously.
If the still picture jitters or jumps, perform the following.
During still playback, keep the button or pressed until the picture
becomes stable.
- With certain TV models and tapes, it may not be possible to adjust the tracking.
- If you play back a cassette that was recorded on another unit of VCR, the
picture quality may be inferior in the normal playback, slow playback, and
still playback, and it may need to manual adjust the tracking by above
method.
- Also, on some TVs, the picture may scroll up and down in the special
playback functions.
However, these are not malfunctions.
Playback picture
containing noise bars Playback picture
containing noise bars
Tracking control
CH
TRACKING/V-LOCK
DVD
TV
VCR
21
Notes:
VCR DVD