Panasonic NV-VP30EBL - Manual (Page 22)

Recording
Set the TV set to the video channel and insert a cassette into the VCR; make
sure that the cassette's protection tab is still in.
Select a channel to record from.
Select the AV channel if you are recording via the 21-pin scart cable.
Press
to start recording.
To pause recording:
The function will switch itself off after approx. 5 minutes to protect the video
heads.
To resume recording:
!
!
!
!
!
REC
Press to stop recording.
SP :
LP :
EP : normal recording time - optimal picture quality
double recording time - simple picture quality
triple recording time - reduced picture quality
The VCR display shows: time - counter - tape remain.
Press until 'REMAIN' is displayed. ! DISPLAY
- When you play back LP or EP recordings, some cassettes (e.g. E-300 type)
may produce interference. This is not indicative of a malfunction.
Tape Remain Counter / Indicator
! Prior to starting the recording session, press to set the tape speed. SP/LP/EP
Note:
DVD
TV
VCR
AV REC
A1:Scart input AV1
A2:Scart input AV2
A3:Front input AV3
dc: DVD (disc intern)
AV-channels
REMAIN
VCR
SP
VCR
EP
LP
SP
DISPLAY
SP/LP/EP
22