Panasonic NV-VP30EBL - Manual (Page 39)

Switches the unit into standby mode after the set time of recording, playback or
in Stop mode.
Press repeatedly to extend the switch-off time from 30 to 60, 120,
180 or 240 minutes. The timer setting appears on the VCR/DVD display.
! OFF TIMER
Limiting the recording and playback time
Convenient Automatic Functions
VCR Auto Power On
Auto Playback Start
Play
VCR-off Playback
Play
Auto Rewind
Automatic Switch Off and Eject
EJECT
To eject the Video Cassette using the Remote Control
Stop
When you insert a video cassette, the VCR switches on automatically.
When you insert a video cassette with a broken erasure prevention tab,
playback starts automatically without pressing the
button.
When the VCR is off, and you press the button with a tape inserted, the
VCR switches on and playback begins.
When the tape reaches the end, the VCR automatically rewinds it to the
beginning (This function is disabled during timer recording).
When the VCR is switched off, a tape can be ejected by pressing the
button. The VCR will eject the cassette and automatically turn itself off again.
Keep the button pressed for more than 3 seconds.
Advanced functions
To reset the tape counter (elapsed time) to “0:00.00”.
The tape counter is automatically reset to “0:00.00” when a video cassette is
inserted.
The tape counter can also be reset to “0:00.00” by pressing the
button on the remote control. !
! RESET
Tape Counter
PLAY MODE
TV ASPECT
OFF TIMER
CANCEL/RESET
VCR
SP
DVD CD
- V RAM
DVD
TV
VCR
39
VCR DVD